2c:T493,

[PRODUCT_DESCRIPTION]

This unique product is the most versatile locking unit available; it will accommodate 6 different hole spacing patterns, from 3 inch, 3-1/2 inch, 3-15/16 inch, 4-15/16 inch, 5-5/8 inch and 6-7/8 inch. The 3-15/16 inch hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. Both the 3 inch and 3-1/2 inch on center mounting holes are not machine thread tapped, all others are. These holes are offset 1/8 inch from that of the locking cylinder hole. The spacing allows locking unit to adapt to a variety of handle sets. The plug has been pre-punched out. Installation note: Trim the tailpiece of the lock if your key sticks and is hard to remove or turn in the lock.

[/PRODUCT_DESCRIPTION]

[SPECIFICATIONS]

The tail piece of the lock may need to be trimmed to fit your door and comes with 2 keys
NOTE - Please refer to the line art drawing for dimensions and compare to your needs before purchasing

[/SPECIFICATIONS]

[WARRANTY]

[/WARRANTY]

2d:T44e,[PRODUCT_DESCRIPTION] This unique product is the most versatile locking unit available; it will accommodate 6 different hole spacing patterns, from 3 inch, 3-1/2 inch, 3-15/16 inch, 4-15/16 inch, 5-5/8 inch and 6-7/8 inch. The 3-15/16 inch hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. Both the 3 inch and 3-1/2 inch on center mounting holes are not machine thread tapped, all others are. These holes are offset 1/8 inch from that of the locking cylinder hole. The spacing allows locking unit to adapt to a variety of handle sets. The plug has been pre-punched out. Installation note: Trim the tailpiece of the lock if your key sticks and is hard to remove or turn in the lock. [/PRODUCT_DESCRIPTION] [SPECIFICATIONS] The tail piece of the lock may need to be trim

Steel Tilt Balance Tension Tool, 10 Inch Length, Chrome Plated (Single Pack)

Steel Tilt Balance Tension Tool, 10 Inch Length, Chrome Plated (Single Pack)

Product Details

Specifications

Warranties & Manuals